Elegoo Dental Castable Resin 500g - Green
₹4,000.00
Taxes Included
DESCRIPTION
This is suitable only for dental
Not suitable for jewellery
Operating temperature : 25~35℃,68℉~95℉
Shake well before each use. If the resin is very viscous, preheat the bottle with 60-80℃ warm water before shaking it.
Please wear nitrile rubber gloves during operation and keep the operating environment well ventilated.
Do not use resin near windows, balconies or other strong ultraviolet environment.
If you accidentally get resin into your eyes, mouth or nose, rinse immediately with plenty of water and consult a doctor.
The resin remaining on the skin can be washed with soap, hand sanitizer, etc
Quantity
Out of stock
Feature
Shrinkage rate only ~0.2-0.5% for accurate casting outcomes.
High mechanical strength: maximum force ~129.32 kgf ±10%.
Tensile strength ~31.285 MPa ±10%, good elongation and flexibility for post-processing.
Flexural strength ~39.721 MPa, flexural modulus ~811 MPa.
Shore Hardness D of 85–88 meaning robust model surfaces for handling and finishing.
Low viscosity (50-170 mPa•s) and designed for green castable workflow.
Certified absorption band of 385-410 nm — compatible with typical dental LCD/DLP printers.
Key Specification
• Shrinkage Rate: 0.2 % – 0.5 %
• Maximum Force: 129.32 kgf (±10 %)
• Tensile Strength: 31.285 MPa (±10 %)
• Yield Point Elongation: 6.322 % (±10 %)
• Elongation at Break: 8.852 % (±10 %)
• Flexural Strength: 39.721 MPa (±10 %)
• Flexural Modulus: 811.072 MPa (±10 %)
• Shore Hardness (D): 85-88
• Notched Impact Strength: 135.66 J/m (±10 %)
• Tensile Modulus: 434.5 MPa (±10 %)
• Viscosity: 50-170 mPa•s
• Absorption Band for Curing: 385-410 nm
• Density: 1.05 – 1.25 g/cm³
